Note: The actual parameters are subject to the final atlas

LT SA5993

Super Artery EXCEEDS ISO18752 DC

Inner rubber layer：NBR or CR synthetic rubber, suitable forbiodegradable hydraulic fluids.
Reinforcement：Four layers of steel wire winding (1/4"‒1"), pulse ≥1 million, six layers of steel wire winding (1 1/4"‒2"), pulse ≥1 million times
Outer layer：standard;abrasion, weather resistant synthetic rubber.
               AR cover: highly abrasion, weather resistant synthetic rubber.
               SAR cover: super abrasion,weather resistant UHMWPE.
              
Temperature range：-40°C to +121°C (-40°F to +250°F)
Low bending：the bending radius is reduced by 27% compared with the ISO18752 standard; it is reduced by 37% compared with the SAE standard
High pressure：pressure conforms to ISO18752 DC standard

Inquiry

More

LTSA699

Super Artery wire braided hose

Tube：CR/NBR synthetic rubber
Reinforcement：braided high tensile super fexible steel wire, one braid impulse reaches 300,000 cycles, two braids reaches 600,000 cycles
OuterLayer：Black glossy anti-aging and non-peeling synthetic rubber layer
Low bending radius：30% lower than SAE/DIN standards
High pressure：25% higher than SAE/DIN standards
Long service life：weather resistant for more than 5 years and warrantied for 2years (with Letone specific hoseconnectors)

Inquiry

More

LTSA599-FH

Super Artery super soft hose

Inner Layer：Oil resistant synthetic rubber
Reinforcement：4-layered high-strength super-flexible steel wire
Outer Layer：Wear-resistant, weather-resistant synthetic rubber (weather-resistant for 5 years, warranty for 3 years)
Characteristic：Low bending-bending radius is 50% lower than DIN EN853 standard; high-pressure-pressure is 30%~40% higher than DIN EN853 standard; long life.
Hose Fitting：It adopts high-quality carbon structural steel, the core material is 45# steel, the nut material is 35# steel, and the sleeve is 20# steel, which conforms to the national, British and American national standards. The joint sealing is made of hydrogenated nitrile rubber (10 years of aging resistance) Above) Use the one-piece hose connector specially provided by Litong, with pulse >= 1 million times.
Temperature Range：-40℃~+85℃(-40℉~+185℉)H

Inquiry

More

LT SA6991

Super Artery EXCEEDS ISO18752-BC/CC

Inner rubber layer： NBR or CR synthetic rubber, suitable for biodegradablehydraulic fluids.
Reinforcement layer：one or two layers of steel wire weaving (1/2" ‒3/4"), pulse ≥ 300,000 times, four layers of steel wire winding (1" ‒ 2"), pulse ≥ 1 million times
Outer layer：standard: no-skive abrasion, weather resistant synthetic rubber.
              AR cover: no-skive, highly abrasion, weather resistant synthetic rubber.
              SAR cover: super abrasion, weather resistant UHMWPE.
Temperature range：-40℃ to +100℃ (-40℉ to +212℉) -40℃ to +121℃ (-40℉ to +250℉)
Low bending：the bending radius is reduced by 41% compared to the ISO18752 standard; 47% lower than the SAE standard
High pressure：exceed the SAE standard by 60%

Inquiry

More